2025-01-12-19-39-33.png)
Description
In enduro mountain biking, “Full Send” embodies the fearless approach of riders who test their limits on the most challenging trails. It's about confidence, determination and pure adrenaline that comes from effortlessly conquering technical descents and rough terrain.
When the trails demand your full concentration, the PRO Tharsis EVO handlebar and stem combination will allow you to precisely navigate even the most difficult, rocky trails and easily conquer them at maximum speed.
The highest quality, thanks to intelligent design and rigorous product testing, is guaranteed for a long time.
Enduro/trail stem with the highest standards of stiffness and safety.
The uniform look of the Tharsis EVO handlebar and stem combination without compromising on fit, adjustability or functionality.
Brake cables or dropper post control cables can be routed from the handlebars through the stem.
7050 aluminum, CNC optimized.
Clamp HEADLOC handlebar - combines safety, ease of use and attractive design.
Oversized 35 mm handlebar clamp for direct steering response and high rigidity in the head tube area.
Available in lengths from 35 to 50 mm.
Length: 35 mm
Slope: 0°
Stem: 1-1/8" (28.6 mm)
Handlebar: 35 mm
Weight: from 145g
Safety warning
In case of failure to follow the instructions serious injury may occur.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please carefully read the manufacturer's instructions for all additional components (brake levers, shift levers, attachments, etc.).
Regularly check that the screws are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
When the trails demand your full concentration, the PRO Tharsis EVO handlebar and stem combination will allow you to precisely navigate even the most difficult, rocky trails and easily conquer them at maximum speed.
The highest quality, thanks to intelligent design and rigorous product testing, is guaranteed for a long time.
Enduro/trail stem with the highest standards of stiffness and safety.
The uniform look of the Tharsis EVO handlebar and stem combination without compromising on fit, adjustability or functionality.
Brake cables or dropper post control cables can be routed from the handlebars through the stem.
7050 aluminum, CNC optimized.
Clamp HEADLOC handlebar - combines safety, ease of use and attractive design.
Oversized 35 mm handlebar clamp for direct steering response and high rigidity in the head tube area.
Available in lengths from 35 to 50 mm.
Length: 35 mm
Slope: 0°
Stem: 1-1/8" (28.6 mm)
Handlebar: 35 mm
Weight: from 145g
Safety warning
In case of failure to follow the instructions serious injury may occur.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please carefully read the manufacturer's instructions for all additional components (brake levers, shift levers, attachments, etc.).
Regularly check that the screws are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Additional information
| Category: | Bike parts |
| For headset: | 28,6 mm (1-1/8") |
| Stem length: | 35 mm |
| Stem suitability: | MTB |
| Handlebar diameter: | 35 mm (1-3/8") |
PRO Stem THARSIS EVO 0° 35
139,03 €
113,03 € excl. VAT
