SHIMANO Front Hub XT HB-M8210 110x15mm Axle 32t. Black Center Lock

The new DEORE XT HB-M8210-B front hub offers improved reliability and performance. Industrial bearings and new types of seals ensure lower rolling resistance. This front hub is available in boost configuration (110x15mm) and traditional 28 or 32 hole versions.

Type: MTB, Total package weight: 249g, 32 holes, Front, black, 15mm, Mounting method: Thru axle, Center Lock, Material: Aluminum

View product manual.

Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you at the place of purchase or from your distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. Incorrect use of the axle release lever may cause the wheel to come off, etc., and may result in serious injury due to a fall or collision.
- Before riding the bicycle, you should thoroughly check the hubs and make sure that there are no cracks on the axles; if you find any abnormal conditions, DO NOT USE the bicycle. This front hub is designed for downhill and freeride cycling. However, depending on the riding conditions, cracks may form on the hub axle, which may result in axle failure. This may lead to an accident, which could result in serious injury or even death.
- This hub can only be used in combination with a special front fork and E-THRU. If used in combination with any other front fork or hub axle, the wheel may come off the bicycle while riding, resulting in serious injury.
- When installing the front wheel to the front suspension fork, always follow the instructions in the front suspension fork manual. The method of securing the front wheel and the tightening torque for the front wheel vary depending on the type of front suspension fork used. Failure to follow the instructions may cause the front wheel to fall off, resulting in serious injury.
- Check that the axle release lever does not interfere with the disc brake rotor even when fully engaged. If the axle release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the axle release lever interferes with the disc brake rotor, stop using it immediately and contact the place of purchase or distributor.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html