2025-01-12-19-39-33.png)
The stem perfectly complements the new KORYAK MTB handlebars.
Made of AL6061 aluminum alloy.
Available in lengths from 35 to 60 mm.
Length: 35 mm
Slope: 0°
Stem: 1-1/8" (28.6 mm)
Handlebars: 31.8 mm
Weight: from 150g
Safety warning
Failure to follow instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please carefully read the manufacturer's instructions for all additional components (brake levers, shifters levers, extensions, etc.).
Regularly check that the screws are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Solid stems |
| For headset: | 28,6 mm (1-1/8") |
| Stem length: | 60 mm |
| Stem suitability: | MTB |
| Handlebar diameter: | 31,8 mm (1-1/4") |
46,13 €
37,51 € excl. VAT
